vpruthi/doc-exports
1
0
Fork 0
forked from docs/doc-exports
Code Pull Requests Activity
doc-exports/docs/vpn/umn/vpn_ug_00010.html
Hongwei, King Wang f0e04482a8 vpn_umn1 
Reviewed-by: Sarda, Priya <prsarda@noreply.gitea.eco.tsi-dev.otc-service.com>
Co-authored-by: Hongwei, King Wang <king.wanghongwei@huawei.com>
Co-committed-by: Hongwei, King Wang <king.wanghongwei@huawei.com>
2024-08-27 09:43:37 +00:00

6.8 KiB
Raw Permalink Blame History

Modifying a Customer Gateway

Scenario

After creating a customer gateway, you can modify its name.

Procedure

  1. Log in to the management console.
  2. Click in the upper left corner and select the desired region and project.
  3. Click in the upper left corner of the page, and choose Network > Virtual Private Network.
  4. In the navigation pane on the left, choose Virtual Private Network > Enterprise – Customer Gateways.
  5. On the Customer Gateways page, click next to the name of a customer gateway.
  6. Enter a new name for the customer gateway and click OK.
    Table 1 describes the parameters related to customer gateway modification.
    Table 1 Parameters related to customer gateway modification

    Parameter

    Description

    Modifiable or Not

    Name

    Name of a VPN connection. The value can contain only letters, digits, underscores (_), hyphens (-), and periods (.).

    Y

    BGP ASN

    		 The BGP ASN needs to be specified only when Routing Mode is set to Dynamic (BGP).

    N

    Gateway IP Address

    IP address used by the customer gateway to communicate with the VPN gateway. The value must be a static address.

    Ensure that UDP port 4500 is permitted in a firewall rule on the customer gateway in your on-premises data center or private network.

    N