Modifying a Customer Gateway

Scenario

After creating a customer gateway, you can modify its name.

Procedure

1. Log in to the management console.
2. Click in the upper left corner and select the desired region and project.
3. Click in the upper left corner of the page, and choose Network > Virtual Private Network.
4. In the navigation pane on the left, choose Virtual Private Network > Enterprise – Customer Gateways.
5. On the Customer Gateways page, click next to the name of a customer gateway.
6. Enter a new name for the customer gateway and click OK.
   Table 1 describes the parameters related to customer gateway modification.

   Table 1 Parameters related to customer gateway modification

   Parameter	Description	Modifiable or Not
   Name	Name of a VPN connection. The value can contain only letters, digits, underscores (_), hyphens (-), and periods (.).	Y
   BGP ASN	The BGP ASN needs to be specified only when Routing Mode is set to Dynamic (BGP).	N
   Gateway IP Address	IP address used by the customer gateway to communicate with the VPN gateway. The value must be a static address. Ensure that UDP port 4500 is permitted in a firewall rule on the customer gateway in your on-premises data center or private network.	N