doc-exports/docs/obs/api-ref/obs_04_0100.html

Uploading a Part of an Object - Copy

Functions

After creating a multipart upload job, you can specify its upload ID and upload a part to the job in OBS. Alternatively, you can make an API call to add a part (part of an object or the whole object).

This operation supports server-side encryption.

You cannot determine whether a request is executed successfully only using status_code in the returned HTTP header. If 200 in status_code is returned, the server has received the request and starts to process the request. The body in the response shows whether the request is executed successfully. The request is executed successfully only when the body contains Etag; otherwise, the request fails to be executed.

Copy the source object and save it as part1. If a part1 already exists before the copying, the original part1 will be overwritten by the newly copied part1. After the copy is successful, only the latest part1 is displayed. The old part1 data will be deleted. Therefore, ensure that the target part does not exist or has no value when using the part copy operation. Otherwise, data may be deleted by mistake. The source object in the copy process does not change.

Cold Objects

If source objects are in the Cold storage class, ensure that these objects have been restored before you copy them. If the source object is not restored or is being restored, the copy fails and error 403 Forbidden is returned. The fault is described as follows:

ErrorCode: InvalidObjectState

ErrorMessage: Operation is not valid for the source object's storage class

Request Syntax

PUT /ObjectName?partNumber=partNum&uploadId=UploadID HTTP/1.1 
Host: bucketname.obs.region.example.com
Date: date
x-obs-copy-source: sourceobject
x-obs-copy-source-range:bytes=start-end
Authorization: authorization
Content-Length: length

Request Parameters

To copy a part, you need to specify the part number of the target part and the multipart upload task number. Table 1 describes the parameters.

Table 1 Request parameters

Parameter	Description	Mandatory
partNumber	Indicates the ID of a part to be uploaded. Type: integer	Yes
uploadId	Indicates a multipart upload ID. Type: string	Yes

Request Headers

In addition the common message headers, the request uses two extended headers. Table 3 describes the common message header.

Table 2 Request headers

Header	Description	Mandatory
x-obs-copy-source	Indicates the source object to be copied. Type: string	Yes
x-obs-copy-source-range	Indicates the range of bytes (start - end) to be copied from the source object. start indicates the start byte of the part to be copied and end indicates the end byte. Type: integer	No
x-obs-server-side-encryption-customer-algorithm	Indicates an algorithm used to encrypt a destination part. The header is used in SSE-C mode. Type: string Example: x-obs-server-side-encryption-customer-algorithm:AES256 Constraint: This header must be used together with x-obs-server-side-encryption-customer-key and x-obs-server-side-encryption-customer-key-MD5.	No. This header is required when SSE-C is used. The encryption algorithm must be the same as that used to initiate multipart upload tasks.
x-obs-server-side-encryption-customer-key	Indicates a key used to encrypt a destination part. The header is used in SSE-C mode. This key is used to encrypt objects. Type: string Example: x-obs-server-side-encryption-customer-key:K7QkYpBkM5+hca27fsNkUnNVaobncnLht/rCB2o/9Cw= Constraint: This header is a Base64-encoded 256-bit key and must be used together with x-obs-server-side-encryption-customer-algorithm and x-obs-server-side-encryption-customer-key-MD5.	No. This header is required when SSE-C is used. The key must be the same as that used to initiate multipart upload tasks.
x-obs-server-side-encryption-customer-key-MD5	Indicates the MD5 value of a key used to encrypt a destination part. The header is used in SSE-C mode. The MD5 value is used to check whether any error occurs during the transmission of the key. Type: string Example: x-obs-server-side-encryption-customer-key-MD5:4XvB3tbNTN+tIEVa0/fGaQ== Constraint: This header is a Base64-encoded 128-bit MD5 value and must be used together with x-obs-server-side-encryption-customer-algorithm and x-obs-server-side-encryption-customer-key.	No. This header is required when SSE-C is used. The MD5 value must be the same as that used to initiate multipart upload tasks.
x-obs-copy-source-server-side-encryption-customer-algorithm	Indicates an algorithm used by a source object. The header is used in SSE-C mode. Type: string Example: x-obs-copy-source-server-side-encryption-customer-algorithm:AES256 Constraint: This header must be used together with x-obs-copy-source-server-side-encryption-customer-key and x-obs-copy-source-server-side-encryption-customer-key-MD5.	No. This header is required when SSE-C is used to copy a source object.
x-obs-copy-source-server-side-encryption-customer-key	Indicates the algorithm used to decrypt a source object. The header is used in SSE-C mode. Type: string Example: x-obs-copy-source-server-side-encryption-customer-key:K7QkYpBkM5+hca27fsNkUnNVaobncnLht/rCB2o/9Cw= Constraint: This header is a Base64-encoded 256-bit key and must be used together with x-obs-copy-source-server-side-encryption-customer-algorithm and x-obs-copy-source-server-side-encryption-customer-key-MD5.	No. This header is required when SSE-C is used to copy a source object.
x-obs-copy-source-server-side-encryption-customer-key-MD5	Indicates the MD5 value of the key used for the source object. The header is used in SSE-C mode. The MD5 value is used to check whether any error occurs during the transmission of the key. Type: string Example: x-obs-copy-source-server-side-encryption-customer-key-MD5:4XvB3tbNTN+tIEVa0/fGaQ== Constraint: This header is a Base64-encoded 128-bit MD5 value and must be used together with x-obs-copy-source-server-side-encryption-customer-algorithm and x-obs-copy-source-server-side-encryption-customer-key.	No. This header is required when SSE-C is used to copy a source object.

Request Elements

This request involves no elements.

Response Syntax

HTTP/1.1 status_code
Date: date

<?xml version="1.0" encoding="UTF-8" standalone="yes"?> 
<CopyPartResult xmlns="http://obs.region.example.com/doc/2015-06-30/"> 
    <LastModified>modifiedDate</LastModified>  
    <ETag>etag</ETag> 
</CopyPartResult>

Response Headers

The response to the request uses common headers. For details, see Table 1.

Table 3 Additional response headers

Header	Description
x-obs-server-side-encryption	This header is included in a response if SSE-KMS is used. Type: string Example: x-obs-server-side-encryption:kms
x-obs-server-side-encryption-kms-key-id	Indicates the master key ID. This header is included in a response if SSE-KMS is used. Type: string Format: regionID:domainID:key/key_id regionID is the ID of the region to which the key belongs. domainID is the account ID of the tenant to which the key belongs. key_id is the key ID used in this encryption. Example: x-obs-server-side-encryption-kms-key-id:region:domainiddomainiddomainiddoma0001:key/4f1cd4de-ab64-4807-920a-47fc42e7f0d0
x-obs-server-side-encryption-customer-algorithm	Indicates an encryption algorithm. This header is included in a response if SSE-C is used. Type: string Example: x-obs-server-side-encryption-customer-algorithm:AES256
x-obs-server-side-encryption-customer-key-MD5	Indicates the MD5 value of a key used to encrypt objects. This header is included in a response if SSE-C is used. Type: string Example: x-obs-server-side-encryption-customer-key-MD5:4XvB3tbNTN+tIEVa0/fGaQ==

Response Elements

This response contains elements of a part copy result. Table 4 describes the elements.

Table 4 Response elements

Element	Description
LastModified	Indicates the latest time an object was modified. Type: string
ETag	ETag value of the target part. It is the unique identifier of the part content and is used to verify data consistency when merging parts. Type: string

Error Responses

1. If the AK or signature is invalid, OBS returns 403 Forbidden and the error code is AccessDenied.
2. Check whether the source bucket or destination bucket exists. If the source bucket or destination bucket does not exist, OBS returns 404 Not Found and the error code is NoSuchBucket.
3. If the source object does not exist, OBS returns 404 Not Found and the error code is NoSuchKey.
4. If the user does not have the read permission for the specified object, OBS returns 403 Forbidden and the error code is AccessDenied.
5. If the user does not have the write permission for the destination bucket, OBS returns 403 Forbidden and the error code is AccessDenied.
6. If the specified task does not exist, OBS returns 404 Not Found and the error code is NoSuchUpload.
7. If the user is not the initiator of the multipart upload task, OBS returns 403 Forbidden and the error code is AccessDenied.
8. When the size of a copied part has exceeded 5 GB, OBS returns 400 Bad Request.
9. If a part number is not within the range from 1 to 10000, OBS returns error code 400 Bad Request.

Other errors are included in Table 2.

Sample Request

PUT /tobject02?partNumber=2&uploadId=00000163D40171ED8DF4050919BD02B8 HTTP/1.1
User-Agent: curl/7.29.0
Host: examplebucket.obs.region.example.com
Accept: */*
Date: WED, 01 Jul 2015 05:16:32 GMT
Authorization: OBS H4IPJX0TQTHTHEBQQCEC:dSnpnNpawDSsLg/xXxaqFzrAmMw=
x-obs-copy-source: /destbucket/object01

Sample Response

1 2 3 4 5 6 7 8 9 10 11 12 13

HTTP/1.1 200 OK Server: OBS x-obs-request-id: 8DF400000163D40ABBD20405D30B0542 x-obs-id-2: 32AAAQAAEAABAAAQAAEAABAAAQAAEAABCTIJpD2efLy5o8sTTComwBb2He0j11Ne Content-Type: application/xml Date: WED, 01 Jul 2015 05:16:32 GMT Transfer-Encoding: chunked <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <CopyPartResult xmlns="http://obs.example.com/doc/2015-06-30/"> <LastModified>2015-07-01T05:16:32.344Z</LastModified> <ETag>"3b46eaf02d3b6b1206078bb86a7b7013"</ETag> </CopyPartResult>

Parent topic: Operations on Multipart Upload