vpruthi/doc-exports
1
0
Fork 0
forked from docs/doc-exports
Code Pull Requests Activity
doc-exports/docs/lts/umn/lts_faq_0072.html
Liu, Siying 591a41e089 LTS UMN 20240130 version. 
Reviewed-by: Mützel, Andrea <andrea.muetzel@t-systems.com>
Co-authored-by: Liu, Siying <liusiying@noreply.gitea.eco.tsi-dev.otc-service.com>
Co-committed-by: Liu, Siying <liusiying@noreply.gitea.eco.tsi-dev.otc-service.com>
2024-11-07 13:06:21 +00:00

2.9 KiB
Raw Permalink Blame History

What Do I Do If I Do Not See a Host with ICAgent Installed on the LTS Console?

If a host with ICAgent installed is not displayed on the Hosts tab page on the LTS console, perform the following steps:

  • If you are configuring ECS log ingestion and do not see the host with ICAgent installed on the Hosts tab page:
    1. On the Install ICAgent page, ensure that the installation command is correctly copied. Do not use the installation command across regions.
    2. Ensure that the obtained AK/SK pair is correct and has not been deleted.
    3. Run the netstat -nap | grep icagent command to check whether the network connection status of the host is ESTABLISHED. If yes, the network connection is normal.

  • If you are configuring CCE log ingestion and do not see the host with ICAgent installed on the Hosts tab page:

    1. Ensure that ICAgent has been installed in the CCE cluster.
    2. If ICAgent is not installed, click CCE Cluster on the Hosts tab page and click Upgrade ICAgent.
Parent topic: Host Management