vpruthi/doc-exports
1
0
Fork 0
forked from docs/doc-exports
Code Pull Requests Activity
doc-exports/docs/apig/umn/apig_03_0038.html
Chen, Junjie 324aa7d3c4 APIG UMN 20240708 version 
Reviewed-by: Mützel, Andrea <andrea.muetzel@t-systems.com>
Co-authored-by: Chen, Junjie <chenjunjie@huawei.com>
Co-committed-by: Chen, Junjie <chenjunjie@huawei.com>
2024-11-05 15:25:06 +00:00

8.4 KiB
Raw Permalink Blame History

Viewing or Modifying Gateway Information

You can view and modify the configuration of your gateways on the console.

Procedure

  1. Go to the APIG console.
  1. In the navigation pane, choose Gateways.
  2. Click Access Console or the name of the target gateway.
  3. On the Gateway Information tab, view or modify the configuration of the gateway.

    Table 1 Gateway information

    Modifiable Parameter

    Description

    Basic Information

    Basic information about the gateway, including the name, ID, edition, AZ, description, enterprise project, and maintenance time window.

    • Modify the basic information as required.
    • To copy the gateway ID, click next to the ID.

    Billing Mode

    Billing mode of the gateway and the time when the gateway is created.

    Network
    • VPC

      VPC associated with the gateway. Click the VPC name to view the configuration.

    • Subnet

      Subnet associated with the gateway. Click the subnet name to view the configuration.

    • Security Group

      Security group associated with the gateway. Click the security group name to view the configuration or click to bind a new one.

    Inbound Access
    • VPC Access Address
    • EIP
      • To bind an EIP to the gateway, click Enable.
      • To copy the bound EIP, click .
      • Modify the bandwidth as required. The bandwidth is billed by hour based on the rate of the EIP service.
      • To unbind the EIP from the gateway, click Unbind EIP.

    Outbound Access

    Determine whether to allow backend services of the APIs created in the gateway to be deployed on public networks. You can enable or disable outbound access at any time.

    Routes

    Configure a private network segment that needs to communicate with the gateway. After a gateway is created, it can communicate with the VPC subnet specified during gateway creation by default.

    Configure routes at your premises if the subnet of your data center is within the following three segments: 10.0.0.0/8-24, 172.16.0.0/12-24, and 192.168.0.0/16-24.

Parent topic: Gateway Management