vpruthi/doc-exports
1
0
Fork 0
forked from docs/doc-exports
Code Pull Requests Activity
doc-exports/docs/natgw/umn/nat_01_0001.html
Qin Ying, Fan 3a9c34b627 NATGW UMN 0930 version 
Reviewed-by: Kucerak, Kristian <kristian.kucerak@t-systems.com>
Co-authored-by: Qin Ying, Fan <fanqinying@huawei.com>
Co-committed-by: Qin Ying, Fan <fanqinying@huawei.com>
2022-10-04 06:59:58 +00:00

2.2 KiB
Raw Permalink Blame History

Modifying a NAT Gateway

Scenarios

This section describes how to modify the name, type, or description of a NAT gateway.

Increasing the size of the NAT gateway type does not affect services, but if you switch to a smaller NAT gateway, make sure the reduced capacity will still be enough to meet your service requirements.

Prerequisites

A NAT gateway has been created.

Procedure

  1. Log in to the management console.
  2. Click in the upper left corner and select the desired region and project.
  3. Under Network, choose NAT Gateway.
  4. On the displayed page, locate the row that contains the target NAT gateway and click Modify in the Operation column.
  5. Modify the name, type, or description of the NAT gateway as prompted.

  6. Click Next.
  7. Click Submit.
Parent topic: Managing NAT Gateways