zhangyue b55a939a8a EVS UMN add ESSD V2

Reviewed-by: Hasko, Vladimir <vladimir.hasko@t-systems.com>
Co-authored-by: zhangyue <zhangyue164@huawei.com>
Co-committed-by: zhangyue <zhangyue164@huawei.com>

2023-02-02 16:34:06 +00:00

9.9 KiB

Raw Permalink Blame History

Creating a Snapshot

Scenarios

You can create an EVS snapshot on the management console to save the EVS disk data at a specific time point.

Constraints

A maximum of 7 snapshots can be created for one disk.
Snapshots can be created for both system disks and data disks.
Snapshots can be created only for available or in-use disks.
Snapshots of encrypted disks are stored encrypted, and those of non-encrypted disks are stored non-encrypted.
If a disk is created from a snapshot, the AZ of the disk is the same as that of the snapshot's source disk and cannot be changed.

Creating a Snapshot on the Disks Page

Log in to the management console.
Click in the upper left corner and select the desired region and project.
Under Storage, click Elastic Volume Service.
The disk list page is displayed.
In the disk list, locate the row that contains the target disk, click Create Snapshot in the Operation column.
Configure the basic settings for the snapshot according to Table 1.

Table 1 Snapshot parameter
Parameter

Description

Example Value

Snapshot Name

Mandatory

The name can contain a maximum of 64 characters.

snapshot-01
Click Create Now.
Go back to the Snapshots page to view the snapshot creation information.
After the snapshot status changes to Available, the snapshot has been created.

**Table 1** Snapshot parameter
Parameter	Description	Example Value
Snapshot Name	Mandatory The name can contain a maximum of 64 characters.	snapshot-01

Creating a Snapshot on the Snapshots Page

Log in to the management console.
Click in the upper left corner and select the desired region and project.
Under Storage, click Elastic Volume Service.
The disk list page is displayed.

In the navigation pane on the left, choose Elastic Volume Service > Snapshots.

On the Snapshots page, click Create Snapshot.

Configure the basic settings for the snapshot according to Table 2.

**Table 2** Snapshot parameters
Parameter	Description	Example Value
Region	Mandatory After you select a region, disks in the selected region will be displayed for you to choose.	-
Snapshot Name	Mandatory The name can contain a maximum of 64 characters.	snapshot-01
Select Disk	Mandatory Select a disk based on which the snapshot will be created.	volume-01

Click Create Now.
Go back to the Snapshots page to view the snapshot creation information.
After the snapshot status changes to Available, the snapshot has been created.

Parent topic: Managing EVS Snapshots

9.9 KiB Raw Permalink Blame History