vpruthi/doc-exports
1
0
Fork 0
forked from docs/doc-exports
Code Pull Requests Activity
doc-exports/docs/deh/umn/deh_01_0019.html
guoyanyan 56e45a5c64 DEH UMN 20221031 v1 
Reviewed-by: Goncharov, Artem <artem.goncharov@t-systems.com>
Co-authored-by: guoyanyan <guoyanyan3@huawei.com>
Co-committed-by: guoyanyan <guoyanyan3@huawei.com>
2022-11-08 10:04:49 +00:00

2.4 KiB
Raw Permalink Blame History

Configuring Auto Placement for DeHs

Scenarios

You can configure the auto placement function for each DeH to allow the system to automatically place ECSs on the DeH.

Procedure

  1. Log in to the management console.
  2. Click in the upper left corner and select the desired region and project.
  3. Under Computing, click Dedicated Host.

    The Dedicated Host page is displayed.

  4. Click the name of the target DeH and enable or disable Auto Placement.

Verification

Assume that you have two DeHs with Auto Placement enabled. The vCPUs and Memory (GB) values of DeH A are 83/100 and 167/232, and those of DeH B are 100/100 and 232/232. When creating an ECS, select Auto placement for DeH. Then the system automatically creates the ECS on DeH B to balance the load among two DeHs.

Parent topic: DeH Management