doc-exports/docs/cce/umn/cce_01_0288.html

SecurityGroups

When the Cloud Native Network 2.0 model is used, pods use VPC ENIs or sub-ENIs for networking. You can directly bind security groups and EIPs to pods. CCE provides a custom resource object named SecurityGroup for you to associate security groups with pods in CCE. You can customize workloads with specific security isolation requirements using SecurityGroups.

Notes and Constraints

• This function is supported for CCE Turbo clusters of v1.19 and later. Upgrade your CCE Turbo clusters if their versions are earlier than v1.19.
• A workload can be bound to a maximum of five security groups.

Using the Console

1. In the navigation pane of the CCE console, choose Resource Management > Network.
2. On the SecurityGroup tab page, select the target cluster in the upper right corner and click Create.
3. Set the parameters as described in Table 1.

   Table 1 Configuration parameters

   Parameter	Description	Example Value
   SecurityGroup Name	Enter a SecurityGroup name. Enter 4 to 63 characters. The value must start with a lowercase letter and cannot end with a hyphen (-). Only lowercase letters, digits, and hyphens (-) are allowed.	security-group
   Cluster Name	Select a cluster.	cce-turbo
   Namespace	Select a namespace. If the namespace is not created, click Create Namespace.	default
   Workload	Select a workload.	nginx
   Security Group	The selected security group will be bound to the ENI or supplementary ENI of the selected workload. A maximum of five security groups can be selected from the drop-down list. You must select one or multiple security groups to create a SecurityGroup. If no security group has not been created, click Create Security Group. After the security group is created, click the refresh button. NOTICE: A maximum of 5 security groups can be selected. Hover the cursor on the security group name, and you can view details about the security group.	64566556-bd6f-48fb-b2c6-df8f44617953 5451f1b0-bd6f-48fb-b2c6-df8f44617953

4. After setting the parameters, click Create.

   After the SecurityGroup is created, the system automatically returns to the SecurityGroup list page. You can see that the newly added SecurityGroup is in the list.

Using kubectl

1. Use kubectl to connect to the cluster. For details, see Connecting to a Cluster Using kubectl.
2. Create a description file named securitygroup-demo.yaml.

   vi securitygroup-demo.yaml

   For example, create the following SecurityGroup to bind all nginx workloads with two security groups 64566556-bd6f-48fb-b2c6-df8f44617953 and 5451f1b0-bd6f-48fb-b2c6-df8f44617953 that have been created in advance. An example is as follows:

   apiVersion: crd.yangtse.cni/v1
   kind: SecurityGroup
   metadata:
     name: demo
     namespace: default
   spec:
     podSelector:
       matchLabels:
         app: nginx    
     securityGroups:
     - id: 64566556-bd6f-48fb-b2c6-df8f44617953
     - id: 5451f1b0-bd6f-48fb-b2c6-df8f44617953

   Table 2 describes the parameters in the YAML file.

   Table 2 Description

   Field	Description	Mandatory
   apiVersion	API version. The value is crd.yangtse.cni/v1.	Yes
   kind	Type of the object to be created.	Yes
   metadata	Metadata definition of the resource object.	Yes
   name	Name of the SecurityGroup.	Yes
   namespace	Name of the namespace.	Yes
   Spec	Detailed description of the SecurityGroup.	Yes
   podselector	Used to define the workload to be associated with security groups in the SecurityGroup.	Yes
   SecurityGroups	Security group ID.	Yes

3. Run the following command to create the SecurityGroup:

   kubectl create -f securitygroup-demo.yaml

   If the following information is displayed, the SecurityGroup is being created.

   securitygroup.crd.yangtse.cni/demo created

4. Run the following command to view the SecurityGroup:

   kubectl get sg

   If the name of the created SecurityGroup is demo in the command output, the SecurityGroup is created successfully.

   NAME                       POD-SELECTOR                      AGE
   all-no                     map[matchLabels:map[app:nginx]]   4h1m
   s001test                   map[matchLabels:map[app:nginx]]   19m
   demo                       map[matchLabels:map[app:nginx]]   2m9s

Other Operations

Table 3 Other operations

Operation	Procedure
Deletion	In the navigation pane of the CCE console, choose Resource Management > Network. On the SecurityGroup tab page, select the target SecurityGroup. Click SecurityGroup to delete the SecurityGroup.
Update	In the navigation pane of the CCE console, choose Resource Management > Network. On the SecurityGroup tab page, click Update at the same row as the SecurityGroup. You can update the SecurityGroup ID and associated workload.
Viewing the YAML file	In the navigation pane of the CCE console, choose Resource Management > Network. On the SecurityGroup tab page, click View YAML at the same row as the SecurityGroup. You can view, copy, and download the YAML file.
Viewing events	In the navigation pane of the CCE console, choose Resource Management > Network. On the SecurityGroup tab page, click View Event. You can query the event information.

Parent topic: Networking