vpruthi/doc-exports
1
0
Fork 0
forked from docs/doc-exports
Code Pull Requests Activity
doc-exports/docs/bms/image-creation-guide/en-us_topic_0108604186.html
guoyanyan fe8c0cf45c BMS Image Creation Guide 1109 
Reviewed-by: Hasko, Vladimir <vladimir.hasko@t-systems.com>
Co-authored-by: guoyanyan <guoyanyan3@huawei.com>
Co-committed-by: guoyanyan <guoyanyan3@huawei.com>
2022-11-16 08:53:42 +00:00

3.7 KiB
Raw Permalink Blame History

EulerOS/OpenEuler

For EulerOS, you do not need to install dracut-modules-growroot package. You only need to install cloud-init and cloud-utils-growpart. Cloud-Init has been installed in Installing Cloud-Init.

  1. Check whether cloud-init and cloud-utils-growpart have been installed. If no, perform the following steps to install them.
    [root@localhost ~]# rpm -qa | grep cloud-init
cloud-init-0.7.6-3.x86_64
[root@localhost ~]# rpm -qa | grep growpart
[root@localhost ~]#
  2. Download the cloud-utils-growpart-0.27-10.x86_64.rpm package (from http://repo.huaweicloud.com/euler/2.2/os/x86_64/Packages/), upload the package to the VM, and run the following commands to install it:

    rpm -ivh cloud-utils-growpart-0.27-10.x86_64.rpm

    [root@bms-eulor22 home]# rpm -ivh cloud-utils-growpart-0.27-10.x86_64.rpm
Preparing...                          ############################### [100%]  
Updating / installing...
   1:cloud-utils-growpart-0.27-10     ############################### [100%]

    You can also use an ISO file as the local repo source and run the yum install cloud-utils-growpart command to install it.

  3. Run the commands in 1 again to check whether cloud-utils-growpart is successfully installed.
    [root@localhost ~]# rpm -qa | grep growpart
cloud-utils-growpart-0.27-10.x86_64