vpruthi/doc-exports
1
0
Fork 0
forked from docs/doc-exports
Code Pull Requests Activity
doc-exports/docs/bms/image-creation-guide/en-us_topic_0081116836.html
guoyanyan fe8c0cf45c BMS Image Creation Guide 1109 
Reviewed-by: Hasko, Vladimir <vladimir.hasko@t-systems.com>
Co-authored-by: guoyanyan <guoyanyan3@huawei.com>
Co-committed-by: guoyanyan <guoyanyan3@huawei.com>
2022-11-16 08:53:42 +00:00

2.9 KiB
Raw Permalink Blame History

Configuring the SSH Service

  1. After Linux is installed on the host, open the Linux terminal and run the following command to check the SSH service status:

    service sshd status

    Check whether the SSH service is enabled and whether its status is active.

    • If the SSH service is not enabled, run the service enable sshd command.
    • If the status is not active, run the service sshd start command.
  2. Modify the SSH service configuration file to enable user root to log in to the host using SSH.

    Configuration file path: /etc/ssh/sshd_config

    Set the value of PermitRootLogin to yes.

  3. Run the following command to restart the SSH service after the configuration is complete:

    service sshd restart

Parent topic: Appendix