lboka/doc-exports
1
0
Fork 0
forked from docs/doc-exports
Code Pull Requests Activity
doc-exports/docs/eip/umn/eip_0018.html
Qin Ying, Fan 1e074c969a EIP UMN 20240126 version 
Reviewed-by: Sarda, Priya <prsarda@noreply.gitea.eco.tsi-dev.otc-service.com>
Co-authored-by: Qin Ying, Fan <fanqinying@huawei.com>
Co-committed-by: Qin Ying, Fan <fanqinying@huawei.com>
2024-05-21 11:04:33 +00:00

3.5 KiB
Raw Blame History

Adding EIPs to a Shared Bandwidth

Scenarios

You can add multiple EIPs to a shared bandwidth to save costs.

Notes and Constraints

  • The type of EIPs must be the same as that of the shared bandwidth the EIPs to be added to.
  • 5_gray EIPs cannot be added to the same bandwidth as EIPs of other types. If they are in the same shared bandwidth, the bandwidth limit settings will not take effect.

Procedure

  1. Log in to the management console.
  1. Click in the upper left corner and select the desired region and project.
  2. Click in the upper left corner, and choose Network > Elastic IP.
  3. In the navigation pane on the left, choose Elastic IP and Bandwidth > EIPs.
  4. In the EIP list, locate the target EIP. In the Operation column, choose More > Add to Shared Bandwidth.
    Figure 1 Adding an EIP to a shared bandwidth
    • After an EIP is added to a shared bandwidth, the dedicated bandwidth used by the EIP will become invalid and the EIP will start to use the shared bandwidth. The EIP will be removed from the original dedicated bandwidth.
  5. Click OK.
Parent topic: Elastic IP