dadrobna/enterprise-router
1
0
Fork 0
forked from docs/enterprise-router
Code Pull Requests Activity
enterprise-router/umn/source/flow_logs/creating_a_flow_log.rst
proposalbot 5f54580f4f Changes to er_umn from docs/doc-exports#680 (ER UMN 20230324 version 
first uplo

Reviewed-by: Sarda, Priya <prsarda@noreply.gitea.eco.tsi-dev.otc-service.com>
Co-authored-by: proposalbot <proposalbot@otc-service.com>
Co-committed-by: proposalbot <proposalbot@otc-service.com>
2023-12-06 13:27:37 +00:00

10 KiB
Raw Blame History

original_name

er_01_0109.html

Creating a Flow Log

Scenarios

This section describes how to create a flow log to record information about the traffic of enterprise router attachments.

Notes and Constraints

Only one flow log can be created for an attachment in the same log group and log stream.

Procedure

  1. Log in to the management console.

  2. Click image1 in the upper left corner and select the desired region and project.

  3. Click Service List and choose Networking > Enterprise Router.

    The Enterprise Router homepage is displayed.

  4. Search for the target enterprise router by name.

    Figure 1 Searching for an enterprise router

  5. Click the enterprise router name and click Flow Logs.

    The flow log list page is displayed.

    Figure 2 List of flow logs

  6. On the Flow Logs tab, click Create Flow Log.

    The Create Flow Log dialog box is displayed.

    Figure 3 Creating a flow log

  7. Configure the parameters based on Table 1 <er_01_0109__table7204821194013>.

    Table 1 Parameters for creating a flow log
    Parameter Setting Example Value
    Name

    Mandatory

    Enter a name for the flow log. The name:

    • Must contain 1 to 64 characters.
    • Can contain letters, digits, underscores (_), hyphens (-), and periods (.).
    		 flowlog-ab
    Resource Type

    Mandatory

    Select the type of the resource whose traffic information is to be collected. The enterprise router flow log function can capture traffic of the following attachments:

    • VPC
    • Virtual gateway: Virtual gateway of Direct Connect
    		 Virtual gateway
    Resource

    Mandatory

    In the resource list, select the resource whose traffic information is to be collected.

    		 vgw-ab
    Log Group

    Mandatory

    Select a log group.

    If there is no log group, click Create Log Group.

    		 lts-group-ab
    Log Stream

    Mandatory

    Select a log stream.

    If there is no log stream, click Create Log Stream.

    		 lts-topic-ab
    Description

    Optional

    Describe the flow log as required.

    		 -

  8. Click OK.

    The flow log list is displayed.

  9. View the flow log status.

    If the flow status changes from Creating to Enabled, the flow log is successfully created.