A200161411/cloud-container-engine

proposalbot 85e1a6ed92 Changes to cce_umn from docs/doc-exports#770 (Added the support of the OS for fe

Reviewed-by: Eotvos, Oliver <oliver.eotvos@t-systems.com>
Co-authored-by: proposalbot <proposalbot@otc-service.com>
Co-committed-by: proposalbot <proposalbot@otc-service.com>

2023-06-20 14:44:25 +00:00

10 KiB

Raw Blame History

original_name: cce_10_0142.html

NodePort

Scenario

A Service is exposed on each node's IP address at a static port (NodePort). A ClusterIP Service, to which the NodePort Service will route, is automatically created. By requesting <NodeIP>:<NodePort>, you can access a NodePort Service from outside the cluster.

Notes and Constraints

By default, a NodePort Service is accessed within a VPC. If you need to use an EIP to access a NodePort Service through public networks, bind an EIP to the node in the cluster in advance.
After a Service is created, if the affinity setting is switched from the cluster level to the node level, the connection tracing table will not be cleared. You are advised not to modify the Service affinity setting after the Service is created. If you need to modify it, create a Service again.
CCE Turbo clusters support only cluster-level service affinity.
In VPC network mode, when container A is published through a NodePort service and the service affinity is set to the node level (that is, externalTrafficPolicy is set to local), container B deployed on the same node cannot access container A through the node IP address and NodePort service.
When a NodePort service is created in a cluster of v1.21.7 or later, the port on the node is not displayed using netstat by default. If the cluster forwarding mode is iptables, run the iptables -t nat -L command to view the port. If the cluster forwarding mode is ipvs, run the ipvsadm -nL command to view the port.

Creating a NodePort Service

Log in to the CCE console and click the cluster name to access the cluster.
Choose Networking in the navigation pane and click Create Service in the upper right corner.
Set intra-cluster access parameters.
- Service Name: Specify a Service name, which can be the same as the workload name.
- Service Type: Select NodePort.
- Namespace: Namespace to which the workload belongs.
- Service Affinity: For details, see externalTrafficPolicy (Service Affinity) <cce_10_0142__section18134208069>.
  - Cluster level: The IP addresses and access ports of all nodes in a cluster can access the workload associated with the Service. Service access will cause performance loss due to route redirection, and the source IP address of the client cannot be obtained.
  - Node level: Only the IP address and access port of the node where the workload is located can access the workload associated with the Service. Service access will not cause performance loss due to route redirection, and the source IP address of the client can be obtained.
- Selector: Add a label and click Add. A Service selects a pod based on the added label. You can also click Reference Workload Label to reference the label of an existing workload. In the dialog box that is displayed, select a workload and click OK.
- Port Settings
  - Protocol: protocol used by the Service.
  - Service Port: port used by the Service. The port number ranges from 1 to 65535.
  - Container Port: port on which the workload listens. For example, Nginx uses port 80 by default.
  - Node Port: You are advised to select Auto. You can also specify a port. The default port ranges from 30000 to 32767.
Click OK.

Using kubectl

You can run kubectl commands to set the access type. This section uses a Nginx workload as an example to describe how to set a NodePort Service using kubectl.

Use kubectl to connect to the cluster. For details, see Connecting to a Cluster Using kubectl <cce_10_0107>.

Create and edit the nginx-deployment.yaml and nginx-nodeport-svc.yaml files.

The file names are user-defined. nginx-deployment.yaml and nginx-nodeport-svc.yaml are merely example file names.

vi nginx-deployment.yaml

apiVersion: apps/v1
kind: Deployment
metadata:
  name: nginx
spec:
  replicas: 1
  selector:
    matchLabels:
      app: nginx
  template:
    metadata:
      labels:
        app: nginx
    spec:
      containers:
      - image: nginx:latest
        name: nginx
      imagePullSecrets:
      - name: default-secret

vi nginx-nodeport-svc.yaml

apiVersion: v1
kind: Service
metadata:
  labels:
    app: nginx
  name: nginx-nodeport
spec:
  ports:
  - name: service
    nodePort: 30000     # Node port. The value ranges from 30000 to 32767.
    port: 8080          # Port for accessing a Service.
    protocol: TCP       # Protocol used for accessing a Service. The value can be TCP or UDP.
    targetPort: 80      # Port used by a Service to access the target container. This port is closely related to the applications running in a container. In this example, the Nginx image uses port 80 by default.
  selector:             # Label selector. A Service selects a pod based on the label and forwards the requests for accessing the Service to the pod. In this example, select the pod with the app:nginx label.
    app: nginx
  type: NodePort        # Service type. NodePort indicates that the Service is accessed through a node port.

Create a workload.

kubectl create -f nginx-deployment.yaml

If information similar to the following is displayed, the workload has been created.
```
deployment "nginx" created
```
kubectl get po

If information similar to the following is displayed, the workload is running.
```
NAME                     READY     STATUS             RESTARTS   AGE
nginx-2601814895-qhxqv   1/1       Running            0          9s
```

Create a Service.

kubectl create -f nginx-nodeport-svc.yaml

If information similar to the following is displayed, the Service is being created.

service "nginx-nodeport" created

kubectl get svc

If information similar to the following is displayed, the Service has been created.

# kubectl get svc
NAME             TYPE        CLUSTER-IP     EXTERNAL-IP   PORT(S)          AGE
kubernetes       ClusterIP   10.247.0.1     <none>        443/TCP          4d8h
nginx-nodeport   NodePort    10.247.30.40   <none>        8080:30000/TCP   18s

Access the Service.

By default, a NodePort Service can be accessed by using Any node IP address:Node port.

The Service can be accessed from a node in another cluster in the same VPC or in another pod in the cluster. If a public IP address is bound to the node, you can also use the public IP address to access the Service. Create a container in the cluster and access the container by using Node IP address:Node port.

# kubectl get node -owide
NAME           STATUS   ROLES    AGE    INTERNAL-IP    EXTERNAL-IP   OS-IMAGE                KERNEL-VERSION                CONTAINER-RUNTIME
10.100.0.136   Ready    <none>   152m   10.100.0.136   <none>        CentOS Linux 7 (Core)   3.10.0-1160.25.1.el7.x86_64   docker://18.9.0
10.100.0.5     Ready    <none>   152m   10.100.0.5     <none>        CentOS Linux 7 (Core)   3.10.0-1160.25.1.el7.x86_64   docker://18.9.0
# kubectl run -i --tty --image nginx:alpine test --rm /bin/sh
If you do not see a command prompt, try pressing Enter.
/ # curl 10.100.0.136:30000
<!DOCTYPE html>
<html>
<head>
<title>Welcome to nginx!</title>
<style>
    body {
        width: 35em;
        margin: 0 auto;
        font-family: Tahoma, Verdana, Arial, sans-serif;
    }
</style>
</head>
<body>
<h1>Welcome to nginx!</h1>
<p>If you see this page, the nginx web server is successfully installed and
working. Further configuration is required.</p>

<p>For online documentation and support please refer to
<a href="http://nginx.org/">nginx.org</a>.<br/>
Commercial support is available at
<a href="http://nginx.com/">nginx.com</a>.</p>

<p><em>Thank you for using nginx.</em></p>
</body>
</html>
/ #

externalTrafficPolicy (Service Affinity)

For a NodePort Service, requests are first sent to the node port, then the Service, and finally the pod backing the Service. The backing pod may be not located in the node receiving the requests. By default, the backend workload can be accessed from any node IP address and service port. If the pod is not on the node that receives the request, the request will be redirected to the node where the pod is located, which may cause performance loss.

externalTrafficPolicy is a configuration parameter of the Service.

apiVersion: v1
kind: Service
metadata:
  name: nginx-nodeport
spec:
  externalTrafficPolicy: local
  ports:
  - name: service
    nodePort: 30000
    port: 80
    protocol: TCP
    targetPort: 80
  selector:
    app: nginx
  type: NodePort

If the value of externalTrafficPolicy is local, requests sent from Node IP address:Service port will be forwarded only to the pod on the local node. If the node does not have a pod, the requests are suspended.

The other value of externalTrafficPolicy is cluster (default value), which indicates that requests are forwarded in a cluster.

You can set this parameter when creating a Service of the NodePort type on the CCE console.

The values of externalTrafficPolicy are as follows:

cluster: The IP addresses and access ports of all nodes in a cluster can access the workload associated with the Service. Service access will cause performance loss due to route redirection, and the source IP address of the client cannot be obtained.
local: Only the IP address and access port of the node where the workload is located can access the workload associated with the Service. Service access will not cause performance loss due to route redirection, and the source IP address of the client can be obtained.

10 KiB Raw Blame History