Querying a Bandwidth

Function

This API is used to query details about a bandwidth.

URI

GET /v1/{project_id}/bandwidths/{bandwidth_id}

Request Message

• Request parameter

  None

• Example request

  Get https://{Endpoint}//v1/{project_id}/bandwidths/{bandwidth_id}

Response Message

• Response parameter

  Table 2 Response parameter

  Name	Type	Description
  bandwidth	bandwidth object	Specifies the bandwidth object.

  Table 3 Description of the bandwidth field

  Name	Type	Description
  name	String	Specifies the bandwidth name. The value can contain 1 to 64 characters, including letters, digits, underscores (_), hyphens (-), and periods (.).
  size	Integer	Specifies the bandwidth size. The value ranges from 1 Mbit/s to 1000 Mbit/s by default. (The specific range may vary depending on the configuration in each region. You can see the bandwidth range of each region on the management console.)
  id	String	Specifies the bandwidth ID, which uniquely identifies the bandwidth.
  share_type	String	Possible values are as follows: PER: Dedicated bandwidth WHOLE: Shared bandwidth
  publicip_info	Array of publicip_info objects	Specifies information about the EIP that uses the bandwidth. For details, see Table 4.
  tenant_id	String	Specifies the project ID.
  bandwidth_type	String	Specifies the bandwidth type. The value can be: share: Shared bandwidth gray: Dedicated load balancer bgp: Dynamic BGP
  charge_mode	String	If the value is traffic, the billing is based on traffic.
  billing_info	String	Specifies the bill information. If billing_info is specified, the bandwidth is in yearly/monthly billing mode.
  enterprise_project_id	String	Specifies the enterprise project ID. The value is 0 or a string that contains a maximum of 36 characters in UUID format with hyphens (-). When creating a bandwidth, associate the enterprise project ID with the bandwidth. If this parameter is not specified, the default value is 0, which indicates that the default enterprise project is used.
  status	String	Specifies the bandwidth status. Possible values are as follows: FREEZED (Frozen) NORMAL (Normal)
  created_at	String	Specifies the time (UTC) when the bandwidth is created. Format: yyyy-MM-ddTHH:mm:ss
  updated_at	String	Specifies the time (UTC) when the bandwidth is updated. Format: yyyy-MM-ddTHH:mm:ss

  Table 4 publicip_info object

  Name	Type	Description
  publicip_id	String	Specifies the ID of the EIP that uses the bandwidth.
  publicip_address	String	Specifies the obtained EIP if only IPv4 EIPs are available.
  ip_version	Integer	Specifies the IP address version. Possible values are as follows: 4: IPv4 6: IPv6 (IPv6 is not supported currently.)
  publicip_type	String	Specifies the EIP type. The value can be 5_bgp (Dynamic BGP), 5_mailbgp (Mail BGP), or 5_gray (Dedicated Load Balancer). Constraints: The configured value must be supported by the system. publicip_id is an IPv4 port. If publicip_type is not specified, the default value is 5_bgp.

• Example response

  {
    "bandwidth": {
      "id": "3cbd5ae9-368f-4bc8-8841-f2ecc322c64a",
      "name": "EIPResourceSetup_1553594229",
      "size": 5,
      "share_type": "PER",
      "publicip_info": [
        {
          "publicip_id": "22b02f40-b95f-465a-ae9b-7c8b0f042a41",
          "publicip_address": "10.xx.xx.62",
          "ip_version": 4,
          "publicip_type": "5_bgp",
        }
      ],
      "tenant_id": "26ae5181a416420998eb2093aaed84d9",
      "bandwidth_type": "bgp",
      "charge_mode": "traffic",
      "enterprise_project_id": "0",
      "status": "NORMAL",
      "created_at": "2020-04-21T07:58:02Z",
      "updated_at": "2020-04-21T07:58:02Z"
    }
  }

Status Code

See Status Codes.

Error Code

See Error Codes.