Updating a Bandwidth

Function

This API is used to update information about a bandwidth.

URI

PUT /v1/{project_id}/bandwidths/{bandwidth_id}

Request Message

• Request parameter

  Table 2 Request parameter

  Name	Mandatory	Type	Description
  bandwidth	Yes	bandwidth object	Specifies the bandwidth objects. For details, see Table 3.

  Table 3 Description of the bandwidth field

  Name	Mandatory	Type	Description
  name	No	String	Specifies the bandwidth name. The value can contain 1 to 64 characters, including letters, digits, underscores (_), hyphens (-), and periods (.). If the value is left blank, the name of the bandwidth is not changed. Either parameter name or size must be specified.
  size	No	Integer	Specifies the bandwidth size in Mbit/s. The value ranges from 1 Mbit/s to 1000 Mbit/s by default. (The specific range may vary depending on the configuration in each region. You can see the available bandwidth range on the management console.) If the parameter is not included, the bandwidth size is not changed. Either parameter name or size must be specified. If a decimal fraction (for example 10.2) or a character string (for example "10") is specified, the specified value will be automatically converted to an integer. The minimum increment for bandwidth adjustment varies depending on the bandwidth range. The details are as follows: The minimum increment is 1 Mbit/s if the allowed bandwidth ranges from 0 Mbit/s to 300 Mbit/s (with 300 Mbit/s included). The minimum increment is 50 Mbit/s if the allowed bandwidth ranges from 300 Mbit/s to 1000 Mbit/s (with 1000 Mbit/s included). The minimum increment is 500 Mbit/s if the allowed bandwidth is greater than 1000 Mbit/s.

• Example request

  PUT https://{Endpoint}/v1/{project_id}/bandwidths/{bandwidth_id} 
  
  {
      "bandwidth":
          {"name": "bandwidth123",
           "size": 10
          }
  }

Response Message

• Response parameter

  Table 4 Response parameter

  Name	Type	Description
  bandwidth	bandwidth object	Specifies the bandwidth objects. For details, see Table 5.

  Table 5 Description of the bandwidth field

  Name	Type	Description
  name	String	Specifies the bandwidth name. The value can contain 1 to 64 characters, including letters, digits, underscores (_), hyphens (-), and periods (.).
  size	Integer	Specifies the bandwidth size in Mbit/s. The value ranges from 1 Mbit/s to 1000 Mbit/s by default. (The specific range may vary depending on the configuration in each region. You can see the bandwidth range of each region on the management console.)
  id	String	Specifies the bandwidth ID, which uniquely identifies the bandwidth.
  share_type	String	Possible values are as follows: PER: Dedicated bandwidth WHOLE: Shared bandwidth
  publicip_info	Array of publicip_info objects	Specifies the information about the EIP that uses the bandwidth. For details, see Table 6.
  tenant_id	String	Specifies the project ID.
  bandwidth_type	String	Specifies the bandwidth type. The value can be bgp or share. share: Shared bandwidth bgp: Dynamic BGP
  charge_mode	String	If the value is traffic, the bandwidth is billed by traffic.
  billing_info	String	Specifies the bill information. If billing_info is specified, the bandwidth is in yearly/monthly billing mode.
  enterprise_project_id	String	Specifies the enterprise project ID. The value is 0 or a string that contains a maximum of 36 characters in UUID format with hyphens (-). Value 0 indicates the default enterprise project. To obtain the bandwidth bound to all enterprise projects of the user, set all_granted_eps. When creating a bandwidth, associate the enterprise project ID with the bandwidth. NOTE: This parameter is unsupported. Do not use it.
  status	String	Specifies the bandwidth status. Possible values are as follows: FREEZED (Frozen) NORMAL (Normal)
  created_at	String	Specifies the time (UTC) when the bandwidth is created. Format: yyyy-MM-ddTHH:mm:ss
  updated_at	String	Specifies the time (UTC) when the bandwidth is updated. Format: yyyy-MM-ddTHH:mm:ss

  Table 6 publicip_info objects

  Name	Type	Description
  publicip_id	String	Specifies the ID of the EIP that uses the bandwidth.
  publicip_address	String	Specifies the obtained EIP if only IPv4 EIPs are available.
  publicip_type	String	Specifies the EIP type. The value can be 5_bgp (Dynamic BGP) or 5_mailbgp (Mail BGP). Constraints: The configured value must be supported by the system. publicip_id is an IPv4 port. If publicip_type is not specified, the default value is 5_bgp.

• Example response

  {
      "bandwidth": {
          "id": "3fa5b383-5a73-4dcb-a314-c6128546d855",
          "name": "bandwidth123",
          "size": 10,
          "share_type": "PER",
          "publicip_info": [
              {
                  "publicip_id": "6285e7be-fd9f-497c-bc2d-dd0bdea6efe0",
                  "publicip_address": "161.xx.xx.9",
                  "publicip_type": "5_bgp",
                  "ip_version": 4            
              }
          ],
          "tenant_id": "8b7e35ad379141fc9df3e178bd64f55c",
          "bandwidth_type": "bgp",
          "charge_mode": "traffic",
          "billing_info": "",
          "status": "NORMAL"
      }
  }

Status Code

See Status Codes.

Error Code

See Error Codes.