After configuring alarm notifications, you can receive DBSS alarms on database risks. If this function is not enabled, you have to log in to the management console to view alarms.
- Alarm notifications may be mistakenly blocked. If you have enabled notifications but not received any, check whether they have been blocked as spasms.
- The system collects alarm statistics every 5 minutes and sends alarm notifications (if any).
- You can also enable report notifications to get notified when the reports you subscribed to are generated. For details, see Viewing Audit Reports.
Prerequisites
You have applied for a database audit instance and the Status is Running.
Procedure
- In the navigation tree on the left, choose Settings.
- In the Instance drop-down list, select an instance to configure alarm notifications.
- Click the Alarm Notifications tab.
- Set alarm notifications. For details about related parameters, see Table 1.Figure 1 Configuring alarm notifications
Table 1 Alarm notification parameters Parameter
Description
Example Value
Message Notifications
Enables or disables notifications.
Daily Alarm Notifications
Total number of alarms allowed to be sent every day
NOTICE:- If the number of alarms exceeds this value on a day, no more notification will be sent on that day.
- There is no fixed time point for sending alarm notifications. The system collects statistics every 5 minutes and sends alarm notifications (if any).
30
Alarm Risk Severity
Risk severity of the risk log. The options are as follows:
- High
- Moderate
- Low
High
CPU Alarm Threshold (%)
CPU alarm threshold of an audit instance. When the threshold is exceeded, an alarm notification is generated.
80
Memory Alarm Threshold (%)
Memory alarm threshold of an audit instance. When the threshold is exceeded, an alarm notification is generated.
80
Disk Alarm Threshold (%)
Disk alarm threshold of an audit instance. When the threshold is exceeded, an alarm notification is generated.
80
- Click Apply.