Function

This API is used to query private IP addresses using search criteria and to display the private IP addresses in a list.

URI

GET /v1/{project_id}/subnets/{subnet_id}/privateips

Example:

GET https://{Endpoint}/v1/{project_id}/subnets/{subnet_id}/privateips?limit=10&marker=4779ab1c-7c1a-44b1-a02e-93dfc361b32d

Table 1 describes the parameters.

**Table 1** Parameter description
Name	Mandatory	Type	Description
project_id	Yes	String	Specifies the project ID.
subnet_id	Yes	String	Specifies the unique ID of the subnet to which the private IP address belongs. If you use the management console, the value of this parameter is the Network ID value.
marker	No	String	Specifies a resource ID for pagination query, indicating that the query starts from the next record of the specified resource ID. This parameter can work together with the parameter limit. If parameters marker and limit are not passed, all resource records will be returned. If the parameter marker is not passed and the value of parameter limit is set to 10, the first 10 resource records will be returned. If the value of the parameter marker is set to the resource ID of the 10th record and the value of parameter limit is set to 10, the 11th to 20th resource records will be returned. If the value of the parameter marker is set to the resource ID of the 10th record and the parameter limit is not passed, resource records starting from the 11th records (including 11th) will be returned.
limit	No	Integer	Specifies the number of records that will be returned on each page. The value is from 0 to intmax. limit can be used together with marker. For details, see the parameter description of marker.

Request Message

Request parameter
None

Example request

GET https://{Endpoint}/v1/{project_id}/subnets/{subnet_id}/privateips

Response Message

Request parameter

**Table 2** Request parameter
Name	Type	Description
privateips	Array of privateip objects	Specifies the private IP address objects. For details, see Table 3.

**Table 3** Description of the **privateip** field
Name	Type	Description
status	String	Specifies the status of the private IP address. Possible values are as follows: ACTIVE DOWN
id	String	Specifies the ID of the private IP address, which uniquely identifies the private IP address.
subnet_id	String	Specifies the ID of the subnet from which IP addresses are assigned. If you use the management console, the value of this parameter is the Network ID value.
tenant_id	String	Specifies the project ID.
device_owner	String	Specifies the resource using the private IP address. The parameter is left blank if it is not used. The value can be network:dhcp, network:router_interface_distributed, compute:xxx, or neutron:VIP_PORT. (In value compute:xxx, xxx specifies the AZ name, for example, compute:aa-bb-cc indicates that the private IP address is used by an ECS in the aa-bb-cc AZ). The value range specifies only the type of private IP addresses supported by the current service.
ip_address	String	Specifies the assigned private IP address.

Example response

{
    "privateips": [
        {
            "status": "DOWN",
            "id": "d600542a-b231-45ed-af05-e9930cb14f78",
            "subnet_id": "531dec0f-3116-411b-a21b-e612e42349fd",
            "tenant_id": "8b7e35ad379141fc9df3e178bd64f55c",
            "device_owner": "",
            "ip_address": "192.168.1.11"
        },
        {
            "status": "DOWN",
            "id": "d600542a-b231-45ed-af05-e9930cb14f79",
            "subnet_id": "531dec0f-3116-411b-a21b-e612e42349fd",
            "tenant_id": "8b7e35ad379141fc9df3e178bd64f55c",
            "device_owner": "",
            "ip_address": "192.168.1.12"
        }
    ]
}

Status Code

See Status Codes.

Error Code

See Error Codes.

Querying Private IP Addresses

Function

URI

Request Message

Response Message

Status Code

Error Code