Querying Subnet Details

Function

This API is used to query details about a subnet.

URI

GET /v1/{project_id}/subnets/{subnet_id}

Request Message

• Request parameter

  None

• Example request

  GET https://{Endpoint}/v1/{project_id}/subnets/4779ab1c-7c1a-44b1-a02e-93dfc361b32d

Response Message

• Response parameter

  Table 2 Response parameter

  Name	Type	Description
  subnet	subnet object	Specifies the subnet objects.

  Table 3 subnet objects

  Name	Type	Description
  id	String	Specifies a resource ID in UUID format.
  name	String	Specifies the subnet name. The value can contain 1 to 64 characters, including letters, digits, underscores (_), hyphens (-), and periods (.).
  description	String	Provides supplementary information about the subnet. The value can contain no more than 255 characters and cannot contain angle brackets (< or >).
  cidr	String	Specifies the subnet CIDR block.
  gateway_ip	String	Specifies the subnet gateway address.
  dhcp_enable	Boolean	Specifies whether DHCP is enabled for the subnet.
  primary_dns	String	Specifies the IP address of DNS server 1 on the subnet.
  secondary_dns	String	Specifies the IP address of DNS server 2 on the subnet.
  dnsList	Array of strings	Specifies the IP address list of DNS servers on the subnet.
  availability_zone	String	Identifies the AZ to which the subnet belongs.
  vpc_id	String	Specifies the ID of the VPC to which the subnet belongs.
  status	String	Specifies the status of the subnet. The value can be ACTIVE, UNKNOWN, or ERROR. ACTIVE: indicates that the subnet has been associated with a VPC. UNKNOWN: indicates that the subnet has not been associated with a VPC. ERROR: indicates that the subnet is abnormal.
  neutron_network_id	String	Specifies the ID of the corresponding network (OpenStack Neutron API).
  neutron_subnet_id	String	Specifies the ID of the corresponding subnet (OpenStack Neutron API).
  extra_dhcp_opts	Array of extra_dhcp_opt objects	Specifies the NTP server address configured for the subnet. For details, see Table 4.

  Table 4 extra_dhcp_opt object

  Name	Mandatory	Type	Description
  opt_value	No	String	Specifies the NTP server address configured for the subnet. Constraints: The option ntp for opt_name indicates the NTP server configured for the subnet. Currently, only IPv4 addresses are supported. A maximum of four IP addresses can be configured, and each address must be unique. Multiple IP addresses must be separated using commas (,). The option null for opt_name indicates that no NTP server is configured for the subnet. The parameter value cannot be an empty string.
  opt_name	Yes	String	Specifies the NTP server address name configured for the subnet. Currently, the value can only be set to ntp.

• Example response

  {
      "subnet": {
          "id": "4779ab1c-7c1a-44b1-a02e-93dfc361b32d",
          "name": "subnet",
          "description": "",
          "cidr": "192.168.20.0/24",
          "dnsList": [
              "114.xx.xx.114",
              "114.xx.xx.115"
          ],
          "status": "ACTIVE",
          "vpc_id": "3ec3b33f-ac1c-4630-ad1c-7dba1ed79d85",
          "gateway_ip": "192.168.20.1",
          "dhcp_enable": true,
          "primary_dns": "114.xx.xx.114",
          "secondary_dns": "114.xx.xx.115",
          "availability_zone": "aa-bb-cc",//For example, the AZ is aa-bb-cc.
          "neutron_network_id": "4779ab1c-7c1a-44b1-a02e-93dfc361b32d",
          "neutron_subnet_id": "213cb9d-3122-2ac1-1a29-91ffc1231a12",
          "extra_dhcp_opts": [
              {
                  "opt_value": "10.100.0.33,10.100.0.34",
                  "opt_name": "ntp"
              }
          ]
      }
  }

Status Code

See Status Codes.

Error Code

See Error Codes.