OMS Health Check Indicators

OMS Status Check

Indicator: OMS Status Check

Description: The OMS status check includes the HA status check and resource status check. The HA status includes active, standby, and NULL, indicating the active node, standby node, and unknown, respectively. The resource status includes normal, abnormal, and NULL. If the HA status is NULL, the HA status is unhealthy. If the resource status is NULL or abnormal, the resource status is unhealthy.

Recovery Guide:

1. Log in to the active management node and run the su - omm command to switch to user omm. Run the ${CONTROLLER_HOME}/sbin/status-oms.sh command to check the status of OMS.
2. If the HA status is NULL, the system may be restarting. NULL is an intermediate state, and the HA status will automatically change to a normal state.
3. If the resource status is abnormal, certain component resources of FusionInsight Manager are abnormal. Check whether the status of components such as acs, aos cep, controller, feed_watchdog, fms, guassDB, httpd, iam, ntp, okerberos, oldap, pms, and tomcat component is normal.
4. If any Manager component resource is abnormal, see Manager component status check to rectify the fault.

Manager Component Status Check

Indicator: Manager Component Status Check

Description: This indicator is used to check the running status and HA status of Manager components. The resource running status includes Normal and Abnormal, and the resource HA status includes Normal and Exception. Manager components include Acs, Aos, Cep, Controller, feed_watchdog, Floatip, Fms, GaussDB, HeartBeatCheck, httpd, IAM, NTP, Okerberos, OLDAP, PMS, and Tomcat. If the running status and HA status is not Normal, the check result is unhealthy.

Recovery Guide:

1. Log in to the active management node and run the su - omm command to switch to user omm. Run the ${CONTROLLER_HOME}/sbin/status-oms.sh command to check the status of OMS.
2. If floatip, okerberos, and oldap are abnormal, handle the problems by referring to ALM-12002, ALM-12004, and ALM-12005 respectively.
3. If other resources are abnormal, you are advised to view the logs of the faulty modules.

   If controller resources are abnormal, view /var/log/Bigdata/controller/controller.log of the faulty node.

   If CEP resources are abnormal, view /var/log/Bigdata/omm/oms/cep/cep.log of the faulty node.

   If AOS resources are abnormal, view /var/log/Bigdata/controller/aos/aos.log of the faulty node.

   If feed_watchdog resources are abnormal, view /var/log/Bigdata/watchdog/watchdog.log of the abnormal node.

   If HTTPD resources are abnormal, view /var/log/Bigdata/httpd/error_log of the abnormal node.

   If FMS resources are abnormal, view /var/log/Bigdata/omm/oms/fms/fms.log of the abnormal node.

   If PMS resources are abnormal, view /var/log/Bigdata/omm/oms/pms/pms.log of the abnormal node.

   If IAM resources are abnormal, view /var/log/Bigdata/omm/oms/iam/iam.log of the abnormal node.

   If the GaussDB resource is abnormal, check the /var/log/Bigdata/omm/oms/db/omm_gaussdba.log of the abnormal node.

   If NTP resources are abnormal, view /var/log/Bigdata/omm/oms/ha/scriptlog/ha_ntp.log of the abnormal node.

   If Tomcat resources are abnormal, view /var/log/Bigdata/tomcat/catalina.log of the abnormal node.

4. If the fault cannot be rectified based on the logs, contact O&M personnel and send the collected fault logs.

OMA Running Status

Indicator: OMA Running Status

Description: This indicator is used to check the running status of the OMA. The status can be Running or Stopped. If the OMA is Stopped, the OMA is unhealthy.

Recovery Guide:

1. Log in to the unhealthy node and run the su - omm command to switch to user omm.
2. Run ${OMA_PATH}/restart_oma_app to manually start the OMA and check again. If the check result is still unhealthy, go to 3.
3. If manually starting the OMA cannot resolve the problem, you are advised to check the OMA logs in /var/log/Bigdata/omm/oma/omm_agent.log.
4. If the fault cannot be rectified based on the logs, contact O&M personnel and send the collected fault logs.

SSH Trust Between Each Node and the Active Management Node

Indicator: SSH Trust Between Each Node and the Active Management Node

Description: This indicator is used to check whether the SSH mutual trust is normal. If you can switch to another node through SSH from the active OMS node as user omm without the need of entering the password, SSH communication is normal. Otherwise, SSH communication is abnormal. In addition, if you can switch to another node through SSH from the active OMS node but fail to switch to the active OMS node from the other nodes, SSH communication is abnormal.

Recovery Guide:

1. If the indicator check result is abnormal, the SSH trust relationships between the nodes and the active management node are abnormal. In this case, check whether the permission of the /home/omm directory is omm. If non-omm users have the directory permission, the SSH trust relationship may be abnormal. You are advised to run chown omm:wheel to modify the permission and check again. If the permission on the /home/omm directory is normal, go to 2.
2. The SSH trust relationship exception may cause heartbeat exceptions between Controller and NodeAgent, resulting in node fault alarms. In this case, rectify the fault by referring to the handling procedure of ALM-12006.

Process Running Time

Indicator: Running Time of NodeAgent, Controller, and Tomcat

Description: This indicator is used to check the running time of the NodeAgent, Controller, and Tomcat processes. If the time is less than half an hour (1,800s), the process may have been restarted. You are advised to check the process after half an hour. If multiple check results indicate that the process runs for less than half an hour, the process is abnormal.

Recovery Guide:

1. Log in to the unhealthy node and run the su - omm command to switch to user omm.
2. Run the following command to check the PID based on the process name:

   ps -ef | grep NodeAgent

3. Run the following command to check the process startup time based on the PID:

   ps -p pid -o lstart

4. Check whether the process start time is normal. If the process restarts repeatedly, go to 5.
5. View the related logs and analyze restart causes.

   If the runtime of NodeAgent is abnormal, check /var/log/Bigdata/nodeagent/agentlog/agent.log.

   If the Controller running time is abnormal, check the /var/log/Bigdata/controller/controller.log file.

   If the Tomcat running time is abnormal, check the /var/log/Bigdata/tomcat/web.log file.

6. If the fault cannot be rectified based on the logs, contact O&M personnel and send the collected fault logs.

Account and Password Expiration Check

Indicator: Account and Password Expiration Check

Description: This indicator checks the two operating system users omm and ommdba of MRS. For OS users, both the account and password expiration time must be checked. If the validity period of the account or password is not greater than 15 days, the account is abnormal.

Recovery Guide: If the validity period of the account or password is less than or equal to 15 days, contact O&M personnel.