ALM-12048 Write Packet Error Rate Exceeds the Threshold

Description

The system checks the write packet error rate every 30 seconds. This alarm is generated when the write packet error rate exceeds the threshold (the default threshold is 0.5%) for multiple times (the default value is 5).

You can change the threshold by choosing System > Threshold Configuration > Device > Host > Network Writing > Network Write Packet Rate Information > Write Packet Error Rate.

If hit number is 1, this alarm is cleared when the write packet error rate is less than or equal to the threshold. If hit number is greater than 1, this alarm is cleared when the write packet error rate is less than or equal to 90% of the threshold.

Attribute

Parameters

Impact on the System

The communication is intermittently interrupted, and services time out.

Possible Causes

• The alarm threshold is improperly configured.
• The network environment is abnormal.

Procedure

Check whether the threshold is set properly.

1. Log in to MRS Manager and check whether the threshold (configurable, 0.5% by default) is appropriate.
   • If yes, go to 4.
   • If no, go to 2.

2. Choose System > Threshold Configuration > Device > Host > Network Writing > Network Write Packet Rate Information > Write Packet Error Rate and change the alarm threshold based on the actual service usage.
3. Wait 5 minutes and check whether the alarm is cleared.
   • If yes, no further action is required.
   • If no, go to 4.

Check whether the network is normal.

4. Contact the system administrator to check whether the network is normal.
   • If yes, rectify the network fault and go to 5.
   • If no, go to 6.

5. Wait 5 minutes and check whether the alarm is cleared.
   • If yes, no further action is required.
   • If no, go to 6.

6. Collect fault information.
   1. On MRS Manager, choose System > Export Log.
   2. Contact technical support engineers for help. For details, see technical support.

Reference

None