update pic path

doc/source/helpcenter/helpcenter_training/faq/how_to_update_a_landing_page.rst

@@ -6,16 +6,16 @@ How to update landing page
 
 Mark service as depricated
 
-.. image:: training_images/storage_component_overview.png
+.. image:: faq_images/storage_component_overview.png
-   :target: training_images/storage_component_overview.png
+   :target: faq_images/storage_component_overview.png
    :alt: storage_component_overview
 
 1)**Create fork on gitea**
 
 You need to create fork only in case  you don’t have existing  already
 
-.. image:: traininig_images/infra_otc_metadata.png
+.. image:: faq_images/infra_otc_metadata.png
-   :target: traininig_images/infra_otc_metadata.png
+   :target: faq_images/infra_otc_metadata.png
    :alt: infra_otc_metadata
 
 https://gitea.eco.tsi-dev.otc-service.com/marmulle/otc-metadata/src/branch/main/otc_metadata/data/documents
@@ -56,34 +56,34 @@ In this case I was updating obs-swiftapi.yaml located in https://gitea.eco.tsi-d
 
 After update file propose file changes. Name of branch or pull request should be as short as possible,but meaningful.
 
-.. image:: traininig_images/propose_file_change.png
+.. image:: faq_images/propose_file_change.png
-   :target: traininig_images/propose_file_change.png
+   :target: faq_images/propose_file_change.png
-   :alt: propose_file_change
+   :alt: faq_file_change
 
 5)**Create new pull request**
 
 Change destination branch into infra:main and click New Pull Request.
 
-.. image:: traininig_images/gitea_new_pull_request.png
+.. image:: faq_images/gitea_new_pull_request.png
-   :target: traininig_images/gitea_new_pull_request.png
+   :target: faq_images/gitea_new_pull_request.png
    :alt: gitea_new_pull_request
 
 Change destination branch into infra:main and click New Pull Request
 
-.. image:: traininig_images/gitea_new_pull_request2.png
+.. image:: faq_images/gitea_new_pull_request2.png
-   :target: traininig_images/gitea_new_pull_request2.png
+   :target: faq_images/gitea_new_pull_request2.png
    :alt: gitea_new_pull_request2
 
 Once again -  New Pull Request
 
-.. image:: traininig_images/gitea_new_pull_request3.png
+.. image:: faq_images/gitea_new_pull_request3.png
-   :target: traininig_images/gitea_new_pull_request3.png
+   :target: faq_images/gitea_new_pull_request3.png
    :alt: gitea_new_pull_request3
 
 6)**New pull request  approve, gate**
 
-.. image:: traininig_images/gitea_new_pull_request_approve_gate.png
+.. image:: faq_images/gitea_new_pull_request_approve_gate.png
-   :target: traininig_images/gitea_new_pull_request_approve_gate.png
+   :target: faq_images/gitea_new_pull_request_approve_gate.png
    :alt: gitea_new_pull_request_approve_gate
 
 7)**Delete branch**

doc/source/training/helpcenter_training/faq/how_to_update_a_component_page.rst

@@ -1,94 +0,0 @@
-============================
-How to update component page
-============================
-
-**Goal**
-
-Mark service as depricated
-
-.. image:: training_images/storage_component_overview2.png
-   :target: training_images/storage_component_overview2.png
-   :alt: storage_component_overview
-
-
-1)**Create fork on github**
-
-You need to create fork only in case  you don’t have existing  already
-
-.. image:: training_images/create_github_fork_1.png
-   :target: training_images/create_github_fork_1.png
-   :alt: create_fork_1
-
-Choose your name as owner
-
-.. image:: training_images/create_github_fork_2.png
-   :target: training_images/create_github_fork_2.png
-   :alt: create_fork_2
-
-2)**In case you have existing fork**
-
-You need to sync your fork with main. Then go to branches.
-
-.. image:: training_images/github_sync_fork.png
-   :target: training_images/github_sync_fork.png
-   :alt: sync_fork
-
-3)**Create new branch**
-
-.. image:: training_images/github_new_branch.png
-   :target: training_images/github_new_branch.png
-   :alt: new_branch
-
-Add new branch name:
-
-.. image:: training_images/github_new_branch2.png
-   :target: training_images/github_new_branch2.png
-   :alt: new_branch2
-
-4)**Edit index.rst**
-
-.. image:: training_images/edit_index_rst.png
-   :target: training_images/edit_index_rst.png
-   :alt: edit_index.rst
-
-5)**Edit conf.py **
-
-.. image:: training_images/edit_conf_py.png
-   :target: training_images/edit_conf_py.png
-   :alt: edit_conf_py
-
-6)**Commit changes**
-
-Once you finish with editing of pages click commit changes.
-
-.. image:: training_images/commit_changes.png
-   :target: training_images/commit_changes.png
-   :alt: commit_changes
-
-7)**Compare & pull request**
-
-.. image:: training_images/compare_pull_request.png
-   :target: training_images/compare_pull_request.png
-   :alt: compare_changes
-
-8)**Comparing changes**
-
-Check correct source and target pull request and branch. Then create pull request.
-
-.. image:: training_images/compare_changes.png
-   :target: training_images/compare_changes.png
-   :alt: compare_changes2
-
-9)**Wait for checks, approve and gate**
-
-.. image:: training_images/check_approve_gate.png
-   :target: training_images/check_approve_gate.png
-   :alt: check_approve_gate
-
-10)**Delete branch**
-
-After successful merge delete branch.
-
-.. image:: training_images/delete_branch.png
-   :target: training_images/delete_branch.png
-   :alt: delete_branch

doc/source/training/helpcenter_training/faq/how_to_update_a_landing_page.rst

@@ -1,89 +0,0 @@
-=============================
-How to update landing page
-=============================
-
-**Goal**
-
-Mark service as depricated
-
-.. image:: training_images/storage_component_overview.png
-   :target: training_images/storage_component_overview.png
-   :alt: storage_component_overview
-
-1)**Create fork on gitea**
-
-You need to create fork only in case  you don’t have existing  already
-
-.. image:: traininig_images/infra_otc_metadata.png
-   :target: traininig_images/infra_otc_metadata.png
-   :alt: infra_otc_metadata
-
-https://gitea.eco.tsi-dev.otc-service.com/marmulle/otc-metadata/src/branch/main/otc_metadata/data/documents
-
-2)**Sync fork**
-
-Sync work with main currently do not support sync in console and you need to do it manually.
-
-- you need to configure .ssh/config.ssh/config
-
-.. code-block:: text
-
-	Host gitea.eco.tsi-dev.otc-service.com
-	User git
-	Port 2222
-	HostName gitea.eco.tsi-dev.otc-service.com
-	IdentityFile ~/.ssh/id_rsa
-
-You should be able to ssh gitea and get You've successfully authenticated  message.
-
-.. code-block:: text
-
- ssh gitea.eco.tsi-dev.otc-service.com
-
-Clone your branch, not main:
-
-.. code-block:: text
-
-   git clone ssh://git@gitea.eco.tsi-dev.otc-service.com:2222/marmulle/otc-metadata.git
-
-Then follow instructions to recover fork: https://gitea.eco.tsi-dev.otc-service.com/docs/doc-exports/wiki/Recovering-Fork
-
-3)**Update necessary file**
-
-In this case I was updating obs-swiftapi.yaml located in https://gitea.eco.tsi-dev.otc-service.com/marmulle/otc-metadata/src/branch/main/otc_metadata/data/documents
-
-4)**Propose file changes**
-
-After update file propose file changes. Name of branch or pull request should be as short as possible,but meaningful.
-
-.. image:: traininig_images/propose_file_change.png
-   :target: traininig_images/propose_file_change.png
-   :alt: propose_file_change
-
-5)**Create new pull request**
-
-Change destination branch into infra:main and click New Pull Request.
-
-.. image:: traininig_images/gitea_new_pull_request.png
-   :target: traininig_images/gitea_new_pull_request.png
-   :alt: gitea_new_pull_request
-
-Change destination branch into infra:main and click New Pull Request
-
-.. image:: traininig_images/gitea_new_pull_request2.png
-   :target: traininig_images/gitea_new_pull_request2.png
-   :alt: gitea_new_pull_request2
-
-Once again -  New Pull Request
-
-.. image:: traininig_images/gitea_new_pull_request3.png
-   :target: traininig_images/gitea_new_pull_request3.png
-   :alt: gitea_new_pull_request3
-
-6)**New pull request  approve, gate**
-
-.. image:: traininig_images/gitea_new_pull_request_approve_gate.png
-   :target: traininig_images/gitea_new_pull_request_approve_gate.png
-   :alt: gitea_new_pull_request_approve_gate
-
-7)**Delete branch**