A PVC describes a workload's request for storage resources. This request consumes existing PVs in the cluster. If there is no PV available, underlying storage and PVs are dynamically created. When creating a PVC, you need to describe the attributes of the requested persistent storage, such as the size of the volume and the read/write permissions.

Notes and Constraints

When a PVC is created, the system checks whether there is an available PV with the same configuration in the cluster. If yes, the PVC binds the available PV to the cluster. If no PV meets the matching conditions, the system dynamically creates a storage volume.

Description	PVC Field	PV Field	Matching Logic
region	pvc.metadata.labels (failure-domain.beta.kubernetes.io/region or topology.kubernetes.io/region)	pv.metadata.labels (failure-domain.beta.kubernetes.io/region or topology.kubernetes.io/region)	Defined or not defined at the same time. If defined, the settings must be consistent.
zone	pvc.metadata.labels (failure-domain.beta.kubernetes.io/zone or topology.kubernetes.io/zone)	pv.metadata.labels (failure-domain.beta.kubernetes.io/zone or topology.kubernetes.io/zone)	Defined or not defined at the same time. If defined, the settings must be consistent.
EVS disk type	pvc.metadata.annotations (everest.io/disk-volume-type)	pv.spec.csi.volumeAttributes (everest.io/disk-volume-type)	Defined or not defined at the same time. If defined, the settings must be consistent.
Key ID	pvc.metadata.annotations (everest.io/crypt-key-id)	pv.spec.csi.volumeAttributes (everest.io/crypt-key-id)	Defined or not defined at the same time. If defined, the settings must be consistent.
accessMode	accessMode	accessMode	The settings must be consistent.
Storage class	storageclass	storageclass	The settings must be consistent.

Volume Access Modes

PVs can be mounted to the host system only in the mode supported by underlying storage resources. For example, a file storage system can be read and written by multiple nodes, but an EVS disk can be read and written by only one node.

ReadWriteOnce: A volume can be mounted as read-write by a single node. This access mode is supported by EVS.
ReadWriteMany: A volume can be mounted as read-write by multiple nodes. This access mode is supported by SFS, SFS Turbo, and OBS.

**Table 1** Supported access modes
Storage Type	ReadWriteOnce	ReadWriteMany
EVS	√	×
SFS	×	√
OBS	×	√
SFS Turbo	×	√

Using a Storage Class to Create a PVC

StorageClass describes the storage class used in the cluster. You need to specify StorageClass to dynamically create PVs and underlying storage resources when creating a PVC.

Using the CCE Console

Log in to the CCE console.
Go to the cluster details page, choose Storage from the navigation pane, and click the PersistentVolumeClaims (PVCs) tab.
Click Create PVC in the upper right corner. In the dialog box displayed, set the PVC parameters.
- Creation Method: Select Storage class.
- PVC Name: Enter a PVC name.
- Storage Class: Select the required storage class. The following storage resources can be dynamically provisioned:
  - csi-disk: EVS disk.
  - csi-obs: OBS bucket.
- AZ (supported only by EVS): Select the AZ where the EVS disk is located.
- Disk Type: Select an EVS disk type. EVS disk types vary in different regions.
  - Common I/O
  - High I/O
  - Ultra-high I/O
- Access Mode: ReadWriteOnce and ReadWriteMany are supported. For details, see Volume Access Modes.
- Capacity (GiB) (supported only by EVS and SFS): storage capacity. This parameter is not available for OBS.
- Encryption (supported only for EVS and SFS): Select Encryption. After selecting this option, you need to select a key.
- Secret (supported only for OBS): Select an access key for OBS. For details, see Using a Custom AK/SK to Mount an OBS Volume.
Click Create.

Using YAML

Example YAML for EVS

failure-domain.beta.kubernetes.io/region: region where the cluster is located.
For details about the value of region, see Regions and Endpoints.
failure-domain.beta.kubernetes.io/zone: AZ where the EVS volume is created. It must be the same as the AZ planned for the workload.
For details about the value of zone, see Regions and Endpoints.

apiVersion: v1
kind: PersistentVolumeClaim
metadata:
  name: pvc-evs-auto-example
  namespace: default
  annotations:
    everest.io/disk-volume-type: SSD    # EVS disk type.
    everest.io/crypt-key-id: 0992dbda-6340-470e-a74e-4f0db288ed82  # (Optional) Key ID. The key is used to encrypt EVS disks.
    
  labels:
    failure-domain.beta.kubernetes.io/region: eu-de
    failure-domain.beta.kubernetes.io/zone: eu-de-01
spec:
  accessModes:
  - ReadWriteOnce               # The value must be ReadWriteOnce for EVS.
  resources:
    requests:
      storage: 10Gi             # EVS disk capacity, ranging from 1 to 32768.
  storageClassName: csi-disk    # The storage class type is EVS.

Example YAML for OBS:

apiVersion: v1
kind: PersistentVolumeClaim
metadata:
  name: obs-warm-provision-pvc
  namespace: default
  annotations:
    everest.io/obs-volume-type: STANDARD      # OBS bucket type. Currently, standard (STANDARD) and infrequent access (WARM) are supported.
    csi.storage.k8s.io/fstype: obsfs          # File type. obsfs indicates to create a parallel file system (recommended), and s3fs indicates to create an OBS bucket.
    
spec:
  accessModes:
  - ReadWriteMany             # The value must be ReadWriteMany for OBS.
  resources:
    requests:
      storage: 1Gi                 # This field is valid only for verification (fixed to 1, cannot be empty or 0). The value setting does not take effect for OBS buckets.
  storageClassName: csi-obs        # The storage class type is OBS.

Using a PV to Create a PVC

If a PV has been created, you can create a PVC to apply for PV resources.

Using the CCE Console

Log in to the CCE console.
Go to the cluster details page, choose Storage from the navigation pane, and click the PersistentVolumeClaims (PVCs) tab.
Click Create PVC in the upper right corner. In the dialog box displayed, set the PVC parameters.
- Creation Method: Select Existing volume.
- PVC Name: Enter a PVC name.
- Volume Type: Select your required volume type.
  - EVS
  - SFS
  - OBS
  - SFS Turbo
- Associate Volume: Select the volume to be associated, that is, the PV.
Click Create.

Using YAML

Example YAML for EVS

failure-domain.beta.kubernetes.io/region: region where the cluster is located.
For details about the value of region, see Regions and Endpoints.
failure-domain.beta.kubernetes.io/zone: AZ where the EVS volume is created. It must be the same as the AZ planned for the workload.
For details about the value of zone, see Regions and Endpoints.

apiVersion: v1
kind: PersistentVolumeClaim
metadata:
  name: pvc-test
  namespace: default
  annotations:
    everest.io/disk-volume-type: SAS                                # EVS disk type.
    everest.io/crypt-key-id: fe0757de-104c-4b32-99c5-ee832b3bcaa3   # (Optional) Key ID. The key is used to encrypt EVS disks.
    volume.beta.kubernetes.io/storage-provisioner: everest-csi-provisioner
    
  labels:
    failure-domain.beta.kubernetes.io/region: eu-de
    failure-domain.beta.kubernetes.io/zone: eu-de-01
spec:
  accessModes:
  - ReadWriteOnce               # The value must be ReadWriteOnce for EVS.
  resources:
    requests:
      storage: 10Gi              
  storageClassName: csi-disk     # Storage class name. The value is csi-disk for EVS.
  volumeName: cce-evs-test       # PV name.

Example YAML for SFS:

apiVersion: v1
kind: PersistentVolumeClaim
metadata:
  name: pvc-sfs-test
  namespace: default
  annotations:
    volume.beta.kubernetes.io/storage-provisioner: everest-csi-provisioner
spec:
  accessModes:
  - ReadWriteMany              # The value must be ReadWriteMany for SFS.
  resources:
    requests:
      storage: 100Gi           # Requested PVC capacity.
  storageClassName: csi-nas    # Storage class name. The value is csi-nas for SFS.
  volumeName: cce-sfs-test     # PV name.

Example YAML for OBS:

apiVersion: v1
kind: PersistentVolumeClaim
metadata:
  name: pvc-obs-test
  namespace: default
  annotations:
    everest.io/obs-volume-type: STANDARD                         # OBS bucket type. Currently, standard (STANDARD) and infrequent access (WARM) are supported.
    csi.storage.k8s.io/fstype: s3fs                              # File type. obsfs indicates to create a parallel file system (recommended), and s3fs indicates to create an OBS bucket.
    csi.storage.k8s.io/node-publish-secret-name: test-user
    csi.storage.k8s.io/node-publish-secret-namespace: default
    volume.beta.kubernetes.io/storage-provisioner: everest-csi-provisioner
    
spec:
  accessModes:
  - ReadWriteMany             # The value must be ReadWriteMany for OBS.
  resources:
    requests:
      storage: 1Gi            # Requested PVC capacity. This field is valid only for verification (fixed to 1, cannot be empty or 0). The value setting does not take effect for OBS buckets.
  storageClassName: csi-obs   # Storage class name. The value is csi-obs for OBS.
  volumeName: cce-obs-test    # PV name.

Example YAML for SFS Turbo:

apiVersion: v1
kind: PersistentVolumeClaim
metadata:
  name: pvc-test
  namespace: default
  annotations:
    volume.beta.kubernetes.io/storage-provisioner: everest-csi-provisioner
spec:
  accessModes:
    - ReadWriteMany               # The value must be ReadWriteMany for SFS Turbo.
  resources:
    requests:
      storage: 100Gi              # Requested PVC capacity.
  storageClassName: csi-sfsturbo  # Storage class name. The value is csi-sfsturbo for SFS Turbo.
  volumeName: pv-sfsturbo-test         # PV name.

Using a Snapshot to Creating a PVC

The disk type, encryption setting, and disk mode of the created EVS PVC are consistent with those of the snapshot's source EVS disk.

Using the CCE Console

Log in to the CCE console.
Go to the cluster details page, choose Storage from the navigation pane, and click the PersistentVolumeClaims (PVCs) tab.
Click Create PVC in the upper right corner. In the dialog box displayed, set the PVC parameters.
- Creation Mode: Select Snapshot.
- PVC Name: name of a PVC.
- Snapshot: Select the snapshot to be used.
Click Create.

Using YAML

apiVersion: v1
kind: PersistentVolumeClaim
metadata:
  name: pvc-test
  namespace: default
  annotations:
    everest.io/disk-volume-type: SSD     # EVS disk type, which must be the same as that of the source EVS disk of the snapshot.
  labels:
    failure-domain.beta.kubernetes.io/region: eu-de
    failure-domain.beta.kubernetes.io/zone: 
spec:
  accessModes:
  - ReadWriteOnce
  resources:
    requests:
      storage: '10'
  storageClassName: csi-disk
  dataSource:
    name: cce-disksnap-test             # Snapshot name
    kind: VolumeSnapshot
    apiGroup: snapshot.storage.k8s.io

PersistentVolumeClaims (PVCs)

Notes and Constraints

Volume Access Modes

Using a Storage Class to Create a PVC

Using a PV to Create a PVC

Using a Snapshot to Creating a PVC